Careful! These are addictive!
Great price on your starter! SW
| Yesterday's Weapons Forums http://www.yesterdaysweapons.com/phpBB3/ |
|
| Kentucky Flintlock by Ardesa? http://www.yesterdaysweapons.com/phpBB3/viewtopic.php?f=15&t=13250 |
Page 1 of 1 |
| Author: | shootster [ Tue Dec 13, 2016 9:38 pm ] |
| Post subject: | Kentucky Flintlock by Ardesa? |
I picked up a early imported Kentucky Flintlock I believe to be made by Ardesa of Spain. I got it cheap for $60, So I figured for that kind of money it would ma a good wall Hanger after cleaning up all the rust and tarnish, unplugging the touch hole and a lot of steel wool inside and out. and after cold bluing polishing I took it out and loaded it with 65grns Black powder and priming the pan, it fired beautifully. even with a large flinch with the large flash in the pan because of too much priming powder I hit the target @70 Yards everytime. but now I tried using Allients Black MZ but using Goex's FFFF priming powder. fired everytime. and Cleans up nicely[/img]https://www.flickr.com/photos/145722694@N07/[/img] |
|
| Author: | NebrHogger [ Tue Dec 13, 2016 9:50 pm ] |
| Post subject: | Re: Kentucky Flintlock by Ardesa? |
Careful! These are addictive! Great price on your starter! SW
|
|
| Author: | A square 10 [ Thu Dec 15, 2016 12:06 am ] |
| Post subject: | Re: Kentucky Flintlock by Ardesa? |
you need one of kaintuks - they are the real . american made , example of what is a truly american arm , the way they were back in the day , but im all for any choice you make - long as you post photos for us to enjoy with you , |
|
| Author: | shootster [ Fri Dec 23, 2016 11:39 am ] |
| Post subject: | Re: Kentucky Flintlock by Ardesa? |
been trying to post pics, I just cannot figure out how to post a pic. my wife has tried and neither of us can figure it out. so I managed to post a link to see it but not a good photo. I need to sell some to buy another gun. been out of work for surgery. going back next week under light duty. would love to by a really nice custom gun some day. |
|
| Author: | NebrHogger [ Fri Dec 23, 2016 12:08 pm ] |
| Post subject: | Re: Kentucky Flintlock by Ardesa? |
If you loaded pics from your camera into your computer, it's easy. As far as pics from a phone, I'm not sure how that works. SW |
|
| Author: | A square 10 [ Sat Dec 24, 2016 12:14 am ] |
| Post subject: | Re: Kentucky Flintlock by Ardesa? |
it came up for me in your link , i like it - nice rifle , great price and congrats |
|
| Author: | shootster [ Sat Dec 24, 2016 1:47 pm ] | ||
| Post subject: | Re: Kentucky Flintlock by Ardesa? | ||
finally, here it is after many tries.
|
|||
| Author: | shootster [ Sat Jan 07, 2017 5:38 pm ] |
| Post subject: | Re: Kentucky Flintlock by Ardesa? |
well I took it to the range again and it shoots very well considering the bore is rusty with small pits the whole length of the barrel, it shoots about 8" high at 50 yards maybe it will shoot lower at 100 Yards it does fire every time though. |
|
| Author: | shootster [ Mon Aug 07, 2017 5:07 pm ] |
| Post subject: | Re: Kentucky Flintlock by Ardesa? |
Well I have to say I thought Black MZ was not corrosive, But IT IS. Maybe It takes Longer, But it Has caused Me Some concern. two Of my Muzzle Loaders have corroded after a mild cleaning. I do realize it took about a month to develop corrosion despite cleaning and lubed afterwards. |
|
| Author: | NebrHogger [ Mon Aug 07, 2017 7:21 pm ] |
| Post subject: | Re: Kentucky Flintlock by Ardesa? |
Yeah, most of that stuff is to some extent. You will hear different "proper" ways to clean a BP rifle - I like hot, soapy water with mucho scrubbing best. And several dry patches to remove moisture - then an oily patch. SW |
|
| Author: | shootster [ Thu Aug 10, 2017 3:28 pm ] |
| Post subject: | Re: Kentucky Flintlock by Ardesa? |
You got it right, Hot soapy water it the best way I have found. I am getting lazy as I get older, so I started trying other ways to clean, I guess it good enough for field cleaning first. then Hot, Hot, Hot soapy water. |
|
| Author: | Enfield Shooter [ Tue Aug 15, 2017 8:08 pm ] |
| Post subject: | Re: Kentucky Flintlock by Ardesa? |
Yes, hot, soapy water is good. I have a cleaning solution given to me by a friend that seems to work pretty well. Then there are those barrels that no matter how much you clean with conventional methods it just won't come clean. That's when I break out the foaming bore cleaner! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|