My Dad acquired this Smith Corona 03A3 from the DCM through the NRA back in 1958:
It was back in the days before UPS and FEDEX so it was shipped by Railway Express collect. I remember going to the depot with Dad to pick it up. An unexpected bonus was it had a plastic cleaning kit (oiler) jammed in the butt compartment. We had to remove the buttplate to remove the oiler.
I well remember that the rifle was thoroughly coated inside and out with cosmoline (and I was thrilled that Dad let me clean it up!
)
FJA stamp of Col. Frank J. Atwood, the commander of the Rochester Ordnance District and indicates that the rifle was accepted by the Ordnance Department for service.
Next to it is crossed cannon barrels and the circled belt of the Ordnance Small Arms Command in WW II.
The symbols stamped on the bottom of the stock in front of the trigger guard are sub-inspector markings that were used at various stages of manufacture to indicate that the rifle (or parts) had passed a particular inspection. A number in a diamond usually indicates the stock is a Smith Corona.
It has a Remington trigger guard.
The "circle P" shows the rifle passed a final (P)roof firing test before acceptance.
Overall, the wood and metal is in great shape with exception of this arsenal repair that used some type of wood filler.
The barrel is Smith Corona with a 11-43 date and the reference material I have indicates that the serial number is within the range of units produced in December 1943.
PS - I forgot to mention that the rifle has a plain smooth buttplate similar to the one on my 1903 Springfield. Would this be correct for a SC? I've seen references showing that SC and Remington 03A3s with checkered buttplates (one pattern for SC, a different pattern for Rem.).
PSS - A poster on another forum informed me that this smooth buttplate is from either a 1903 Springfield or Remington. The SC and Rem 03A3s left their respective factorys with individually patterned checkered buttplates.
_________________
AlleyOop
NRA Life Member since 1969