Yesterday's Weapons Forums
http://www.yesterdaysweapons.com/phpBB3/

Bert & Bruce go off to the range (Marshyhope Md.)
http://www.yesterdaysweapons.com/phpBB3/viewtopic.php?f=23&t=14517		 Page 1 of 1
Author:  JPLee [ Sun Jul 17, 2022 4:03 pm ]
Post subject:  Bert & Bruce go off to the range (Marshyhope Md.)
All shot with the No4 Mk2 with the Leatherwood ARTII 600, load & other details on the targets.
Not too shabby for old eyes.
I actually shot these for an informal match on another forum.
Image

Image

The hardware:
Image

The range:
Image

Sorry about the big image I'm still getting used to the forum
Author:  A square 10 [ Tue Jul 19, 2022 11:58 pm ]
Post subject:  Re: Bert & Bruce go off to the range (Marshyhope Md.)
nice shooting - your own loads or milsurp ?
Author:  JPLee [ Wed Jul 20, 2022 12:10 pm ]
Post subject:  Re: Bert & Bruce go off to the range (Marshyhope Md.)
2 different handloads, both to the same velocity.
one with IMR 3031 the other with IMR 4895.
Author:  JPLee [ Wed Jul 20, 2022 5:19 pm ]
Post subject:  Re: Bert & Bruce go off to the range (Marshyhope Md.)
Yay! my (correct) "Omark" marked Leverlock screw arrived! for the Central on the Lithy SMLE.
Its so simple its briliant!
A one winged nut spring loaded by a coil spring, to engage a hex bolt head with a circular "groove machined into it! To tighten/loosen you turn the lever which turns the bolt, clamping the sight! To reposition, you don't want it in your eye, just slip against the spring rotate in a circular section in the hex head, & let drop back to re engage in a different position!

Image

Image

Image

Sorry, these are HUGE & I'm resizing them too!
Author:  lyman1903 [ Wed Jul 20, 2022 8:51 pm ]
Post subject:  Re: Bert & Bruce go off to the range (Marshyhope Md.)
holy jumbo pictures batman
Author:  JPLee [ Thu Jul 21, 2022 6:30 pm ]
Post subject:  dupe, ignore
Oops.
Author:  JPLee [ Thu Jul 21, 2022 6:33 pm ]
Post subject:  Re: Bert & Bruce go off to the range (Marshyhope Md.)
Sorry 'bout that these are the same resized down images I use everywhere, I have no idea why they dont work normally here?
Off to the test section to see what works.
Some size normally then I get the IMax version of others!
Author:  A square 10 [ Thu Jul 21, 2022 8:16 pm ]
Post subject:  Re: Bert & Bruce go off to the range (Marshyhope Md.)
no problem - the details show well when you scan around the photos , glad you got your wingnut so its prperly fitted out , looks like it will serve well for your needs
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/