Yesterday's Weapons Forums http://www.yesterdaysweapons.com/phpBB3/ |
|
Mas rifle tool for those pesky spanner screws!! http://www.yesterdaysweapons.com/phpBB3/viewtopic.php?f=24&t=3800 |
Page 1 of 1 |
Author: | Mybusa [ Thu Feb 21, 2008 3:55 pm ] |
Post subject: | Mas rifle tool for those pesky spanner screws!! |
Well I have figured out a simple way to get those pesky screws that the French put on their rifles. I had to buy a good snap ring plier set that had the interchangeable bits. I used 2 of the bits and a set of channelock pliers. See the photo's. The bits fit well and the channelock's hold the bit tight enough that I had no issues with moving that could cause scratching. Just make sure the pliers are tight!!! It worked well for me. I at first tried actual snap ring pliers but there was too much flexing. Getting the bits far enough in the teeth of the channelocks stopped all flexing. Good luck! |
Author: | A square 10 [ Thu Feb 21, 2008 4:50 pm ] |
Post subject: | |
good idea |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |