Yesterday's Weapons Forums http://www.yesterdaysweapons.com/phpBB3/ |
|
Need some help on ID on this one http://www.yesterdaysweapons.com/phpBB3/viewtopic.php?f=26&t=11583 |
Page 1 of 1 |
Author: | mabk [ Fri Dec 21, 2012 3:14 pm ] |
Post subject: | Re: Need some help on ID on this one |
php8sU0vcAM.jpg [ 68.2 KiB | Viewed 7578 times ] Picture of other side of hilt. |
Author: | NebrHogger [ Fri Dec 21, 2012 3:56 pm ] |
Post subject: | Re: Need some help on ID on this one |
Motif of the handle appears to be Polynesian - otherwise I'd guess Pakistani/Afghan. Strictly a guess on my part. SW |
Author: | Herr Mario [ Fri Dec 21, 2012 8:18 pm ] |
Post subject: | Re: Need some help on ID on this one |
....Mayan end of the world blade made for tourists... ....that head on the end kinda looks like some of those big carved statues of theirs... |
Author: | A square 10 [ Wed Dec 26, 2012 12:40 pm ] |
Post subject: | Re: Need some help on ID on this one |
interesting piece , this reminds me of how important it is to tag what we collect and keep some recorded data for those that will inherit |
Author: | mabk [ Thu Dec 27, 2012 12:46 am ] |
Post subject: | Re: Need some help on ID on this one |
I agree with you on that one A square. Wish he had, from what I have been told Uncle Dan worked all over the world and collected swords and spear but only old ones no reproduction or tourist stuff. Hope to get to go see the whole collection over the weekend. |
Author: | A square 10 [ Thu Dec 27, 2012 4:08 pm ] |
Post subject: | Re: Need some help on ID on this one |
wish you luck finding out what it is - be sure and let us know when you find out , not sure if this might help in the search but its a start ????????? might try contacting to get an answer ????? http://bayonets.com/ http://arms2armor.com/Bayonets/bayonets.htm http://worldbayonets.com/Bayonet_Identi ... guide.html http://www.denner.ca/weapons/eastern/index.html |
Author: | mabk [ Thu Dec 27, 2012 9:04 pm ] |
Post subject: | Re: Need some help on ID on this one |
Thanks A square, will look them up. |
Author: | mabk [ Wed May 29, 2013 4:52 pm ] |
Post subject: | Re: Need some help on ID on this one |
An ID at last. Showed it to a collector of swords and other edged delights and after a bit of digging in his reference stacks he came up with the answer. That funny looking sword is a Flyssa and was used by Moroccan tribe called the Kabyles.(hope I spelled that right) He thinks it may be from the late 1800's. |
Author: | NebrHogger [ Wed May 29, 2013 5:49 pm ] |
Post subject: | Re: Need some help on ID on this one |
A general utility knife? Ceremonial? Looks a bit long for fish cleaning. SW |
Author: | mabk [ Thu May 30, 2013 10:30 am ] |
Post subject: | Re: Need some help on ID on this one |
Don't have an answer for you NebrHogger. The blade is 33 inches long with the back of the blade 1/2 inch thick at the hilt tapering to a bit under 1/4 inch at tip and very sharp. With the brass hilt it balance s very well in the hand. The needle point it has seems more indicative to armor penetration than fish gutting. It shows a good bit of use though and looks like near 1/4 inch sharpened off original blade. Doing a bit more info hunting now that I have a name and tribal information. If anything interesting comes up I'll add more to the post. |
Author: | A square 10 [ Tue Jul 23, 2013 2:36 am ] |
Post subject: | Re: Need some help on ID on this one |
cool , always learning something new here |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |