Yesterday's Weapons Forums

Discussion of history's firearms
Site Announcements

Attention New Members and those new registering!
We had a lot of problems with spammers and bot attacks with the stock measures provided by the software. The 7 for registration was a fix that we came up with on our own that has worked quite well. Yes it is a PIA for both you and administration to put you onto your chosen username.
If you come back on and your login does not work retry with your username without the 7.

Thanks for joining us from the administration.

It is currently Tue Mar 19, 2024 6:45 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Mon Oct 28, 2013 7:10 pm 
Offline
Gunnery Sergeant
Gunnery Sergeant

Joined: Sun Oct 21, 2012 11:03 pm
Posts: 206
Just shot this little .32acp. Every round gets stuck halfway out the chamber on ejection. I was thinkin maybe the barrel spring is the wrong one or something. Fun gun though. Pretty darn accurate too. Any of you have any ideas or have had problems with this? Thanks, Eli


Top
 Profile  
 
PostPosted: Mon Oct 28, 2013 10:58 pm 
Offline
Теперь предлагаем бесплатную ежедневную маммографию!
Теперь предлагаем бесплатную ежедневную маммографию!
User avatar

Joined: Sun Aug 05, 2007 9:04 pm
Posts: 11655
Location: On the couch a lot now that I'm retired
It does sound like a spring issue. If you are able to find another of the same diameter you could try removing a coil at a time. There's a few other things to try, but I'd go with that first if it was mine. SW

_________________
Slava Ukraini!!


Top
 Profile  
 
PostPosted: Mon Oct 28, 2013 11:18 pm 
Offline
Gunnery Sergeant
Gunnery Sergeant

Joined: Sun Oct 21, 2012 11:03 pm
Posts: 206
sounds good, i will try that. Thanks


Top
 Profile  
 
PostPosted: Tue Oct 29, 2013 12:56 am 
Offline
Brigadier General
Brigadier General
User avatar

Joined: Mon Aug 06, 2007 9:26 am
Posts: 18522
Location: Minnesota , USA
id also look at polishing the chamber a bit as well may just be sticking


Top
 Profile  
 
PostPosted: Tue Oct 29, 2013 4:06 am 
Offline
The Butcher
The Butcher

Joined: Thu Aug 13, 2009 9:02 am
Posts: 1636
Location: Occupied Vlaanderen (belgium)
Did you try it with different magazines ?
A

_________________
In the end, there can be only ONE


Top
 Profile  
 
PostPosted: Tue Oct 29, 2013 9:28 pm 
Offline
Gunnery Sergeant
Gunnery Sergeant

Joined: Sun Oct 21, 2012 11:03 pm
Posts: 206
I tried 2 different magazines. One was marked fn the other had no marks. The fn one rides a little higher in the chamber, but they both act the same when ejecting. Every spent round gets stuck halfway out. I have been using winchester 71 grain fmj. Maybe that main spring is a little too tight, I will try to loosen it up. Sure is fun to shoot it even though its slow shootin. I cleaned the chamber but it does still look a little rough. How do you go about polishing the chamber? Thanks for the help/ ideas. I appreciate it! Eli Thats my girlfriends hand holdin the pistol. I swear.


Attachments:
3.JPG
3.JPG [ 73.2 KiB | Viewed 6348 times ]
1.JPG
1.JPG [ 84.88 KiB | Viewed 6348 times ]
Top
 Profile  
 
PostPosted: Wed Oct 30, 2013 2:56 pm 
Offline
Brigadier General
Brigadier General
User avatar

Joined: Mon Aug 06, 2007 9:26 am
Posts: 18522
Location: Minnesota , USA
thats a nice looking pistol , thanks for posting the photos


Top
 Profile  
 
PostPosted: Thu Oct 31, 2013 2:49 am 
Offline
The Butcher
The Butcher

Joined: Thu Aug 13, 2009 9:02 am
Posts: 1636
Location: Occupied Vlaanderen (belgium)
Used to be my favorite CCW, untill I got a Walther PPK.
I do still own a 1910/22 model. No, make that two :bigrin:

A

_________________
In the end, there can be only ONE


Top
 Profile  
 
PostPosted: Wed Feb 12, 2014 1:39 am 
Offline
Gunnery Sergeant
Gunnery Sergeant

Joined: Sun Oct 21, 2012 11:03 pm
Posts: 206
Just got it back from my gunsmith he put a new firing pin in. The old one was almost half an inch short and all nicked up, probably from years of dry firing. He also loosened up the recoil spring. Works awesome now!


Top
 Profile  
 
PostPosted: Wed Feb 12, 2014 3:14 am 
Offline
The Butcher
The Butcher

Joined: Thu Aug 13, 2009 9:02 am
Posts: 1636
Location: Occupied Vlaanderen (belgium)
Glad for you !
BRGDS, A

_________________
In the end, there can be only ONE


Top
 Profile  
 
PostPosted: Wed Feb 12, 2014 7:50 pm 
Offline
Brigadier General
Brigadier General
User avatar

Joined: Mon Aug 06, 2007 9:26 am
Posts: 18522
Location: Minnesota , USA
congrats , love to hear that kind of good news , what a great little pistol


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group