Yesterday's Weapons Forums
http://www.yesterdaysweapons.com/phpBB3/

fn model 1910 jams/ wont eject properly
http://www.yesterdaysweapons.com/phpBB3/viewtopic.php?f=29&t=12094		 Page 1 of 1
Author:  eliculpepper [ Mon Oct 28, 2013 7:10 pm ]
Post subject:  fn model 1910 jams/ wont eject properly
Just shot this little .32acp. Every round gets stuck halfway out the chamber on ejection. I was thinkin maybe the barrel spring is the wrong one or something. Fun gun though. Pretty darn accurate too. Any of you have any ideas or have had problems with this? Thanks, Eli
Author:  NebrHogger [ Mon Oct 28, 2013 10:58 pm ]
Post subject:  Re: fn model 1910 jams/ wont eject properly
It does sound like a spring issue. If you are able to find another of the same diameter you could try removing a coil at a time. There's a few other things to try, but I'd go with that first if it was mine. SW
Author:  eliculpepper [ Mon Oct 28, 2013 11:18 pm ]
Post subject:  Re: fn model 1910 jams/ wont eject properly
sounds good, i will try that. Thanks
Author:  A square 10 [ Tue Oct 29, 2013 12:56 am ]
Post subject:  Re: fn model 1910 jams/ wont eject properly
id also look at polishing the chamber a bit as well may just be sticking
Author:  ANDREY [ Tue Oct 29, 2013 4:06 am ]
Post subject:  Re: fn model 1910 jams/ wont eject properly
Did you try it with different magazines ?
A
Author:  eliculpepper [ Tue Oct 29, 2013 9:28 pm ]
Post subject:  Re: fn model 1910 jams/ wont eject properly
I tried 2 different magazines. One was marked fn the other had no marks. The fn one rides a little higher in the chamber, but they both act the same when ejecting. Every spent round gets stuck halfway out. I have been using winchester 71 grain fmj. Maybe that main spring is a little too tight, I will try to loosen it up. Sure is fun to shoot it even though its slow shootin. I cleaned the chamber but it does still look a little rough. How do you go about polishing the chamber? Thanks for the help/ ideas. I appreciate it! Eli Thats my girlfriends hand holdin the pistol. I swear.

Attachments:
3.JPG
3.JPG [ 73.2 KiB | Viewed 6596 times ]
1.JPG
1.JPG [ 84.88 KiB | Viewed 6596 times ]
Author:  A square 10 [ Wed Oct 30, 2013 2:56 pm ]
Post subject:  Re: fn model 1910 jams/ wont eject properly
thats a nice looking pistol , thanks for posting the photos
Author:  ANDREY [ Thu Oct 31, 2013 2:49 am ]
Post subject:  Re: fn model 1910 jams/ wont eject properly
Used to be my favorite CCW, untill I got a Walther PPK.
I do still own a 1910/22 model. No, make that two :bigrin:

A
Author:  eliculpepper [ Wed Feb 12, 2014 1:39 am ]
Post subject:  Re: fn model 1910 jams/ wont eject properly
Just got it back from my gunsmith he put a new firing pin in. The old one was almost half an inch short and all nicked up, probably from years of dry firing. He also loosened up the recoil spring. Works awesome now!
Author:  ANDREY [ Wed Feb 12, 2014 3:14 am ]
Post subject:  Re: fn model 1910 jams/ wont eject properly
Glad for you !
BRGDS, A
Author:  A square 10 [ Wed Feb 12, 2014 7:50 pm ]
Post subject:  Re: fn model 1910 jams/ wont eject properly
congrats , love to hear that kind of good news , what a great little pistol
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/