| Yesterday's Weapons Forums http://www.yesterdaysweapons.com/phpBB3/ |
|
| Cheap light and small 9mm http://www.yesterdaysweapons.com/phpBB3/viewtopic.php?f=29&t=14426 |
Page 1 of 1 |
| Author: | limpetmine [ Mon Jul 04, 2022 10:24 am ] |
| Post subject: | Cheap light and small 9mm |
So I’ve got the urge for a new 9mm. I’ve got a Springfield single stack hammer fired double action. It’s not light. It’s skinny, but only 9 rounds. And now discontinued. Not that it matters. Ruger makes their Nax-9 which is 12+1, 1” wide, and looks ok. Anyone have any experience with this one? Comments? |
|
| Author: | NRA [ Mon Jul 04, 2022 11:29 am ] |
| Post subject: | Re: Cheap light and small 9mm |
No experience with that model. But when I want a small 9 me go to is the Keltec PF9. I know its cheap and kicks like a mule, yes the trigger is terrible. But it is small and does work. |
|
| Author: | lyman1903 [ Mon Jul 04, 2022 5:26 pm ] |
| Post subject: | Re: Cheap light and small 9mm |
I've sold a few as far as a light concealable 9mm, the Sig P365 and SA Hellcat are great sellers, with no complaints, wpnsman carries a P365 and likes it |
|
| Author: | mtnboomer [ Mon Jul 04, 2022 11:50 pm ] |
| Post subject: | Re: Cheap light and small 9mm |
I got the Kahr CW-9 from Chuck Lee when we were still in the other world. I like the weight. Not too heavy, just about right to carry. Small enough to conceal easily. narrow polymer frame with single stack mag. He said it shot low, but I never got to ask him what weight bullets he shot, 115s or 124s. I need to get it out to the range for testing. |
|
| Author: | A square 10 [ Tue Jul 05, 2022 1:29 am ] | ||
| Post subject: | Re: Cheap light and small 9mm | ||
its not got the hi-cap but i like my sig 938 a lot , as to the SA/DA i always turn to my S&W 39 , i realize these are not what most folks might turn to but they please me , i do have a lot of others but i like these two mostly , if im carrying the 9mm , my kimber is go to in 45acp
|
|||
| Author: | limpetmine [ Tue Jul 05, 2022 9:29 am ] |
| Post subject: | Re: Cheap light and small 9mm |
That P265 SIG is for a right hander only. It's slab sided on the right side. That won't work for me. I've got to have something on that side. So I go looking for the round capacity on my Springfield XD-e and find out they've quit making it. Dammit. I wanted to get one in .45 ACP as well. It's fully ambi. Maybe I need to get me a good solid IWB holster and just start wearing my shirts untucked. I don't usually wear untucked, I think it makes me look like a slob. I'll check out some of the other suggestions. My wife has a M-39 in nickle that she bought when Chester the Molester was roaming the streets back in the 1970's/80's. They caught him, BTW. If I were to carry that I'd carry a 1911. Or my SW4516. |
|
| Author: | lyman1903 [ Thu Jul 07, 2022 3:54 pm ] |
| Post subject: | Re: Cheap light and small 9mm |
| Author: | wpnsman [ Sun Jul 10, 2022 3:26 pm ] |
| Post subject: | Re: Cheap light and small 9mm |
| Author: | Chuck750ss [ Mon Aug 01, 2022 8:50 pm ] |
| Post subject: | Re: Cheap light and small 9mm |
| Author: | wpnsman [ Tue Aug 02, 2022 7:24 pm ] |
| Post subject: | Re: Cheap light and small 9mm |
No, it's basically a non-issue as far as I'm concerned. For every one person who bitches on the internet (instead of letting the vendor/distributor/manufacturer handle the issue) there are thousands with no issues at all. |
|
| Author: | lyman1903 [ Tue Aug 02, 2022 10:52 pm ] |
| Post subject: | Re: Cheap light and small 9mm |
| Author: | Chuck750ss [ Sat Aug 06, 2022 4:54 pm ] |
| Post subject: | Re: Cheap light and small 9mm |
The broken firing pin thing was real. Glad to hear they fixed it. Still, no excuse for a compAny like Sig to release a product with QC issues. I kinda expect that from a Taurus. But not Sig. |
|
| Author: | wpnsman [ Sun Aug 07, 2022 9:27 pm ] |
| Post subject: | Re: Cheap light and small 9mm |
and it's a Non-Issue... So, Buy with confidence. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|