Yesterday's Weapons Forums http://www.yesterdaysweapons.com/phpBB3/ |
|
Reloading brass from a fluted chamber? http://www.yesterdaysweapons.com/phpBB3/viewtopic.php?f=34&t=11908 |
Page 1 of 1 |
Author: | NebrHogger [ Tue Jun 18, 2013 5:56 pm ] |
Post subject: | Reloading brass from a fluted chamber? |
H&K chambers are often fluted which doesn't do the brass any favors. Have any of you reloaded brass recently from a fluted chamber? I've got that Steyr that gives the same effect. It's accurate though & I'd like to keep shooting it... without using new cases every time. SW |
Author: | HerrMesser [ Wed Jun 19, 2013 9:21 am ] |
Post subject: | Re: Reloading brass from a fluted chamber? |
What does a full length die do to it? That would make it refit the chamber. Rad |
Author: | NebrHogger [ Wed Jun 19, 2013 10:09 am ] |
Post subject: | Re: Reloading brass from a fluted chamber? |
Oh, the brass resizes just fine. I'm wondering how long it will last having been displaced that way or if case separation is to be expected. SW |
Author: | HerrMesser [ Thu Jun 20, 2013 9:07 am ] |
Post subject: | Re: Reloading brass from a fluted chamber? |
You might have to watch for longitudinal cracks and splits. I would just reload till the do split. You might get one or two or maybe a dozen first. Better than buying new brass all the time. Rad |
Author: | gschwertley [ Fri Jul 05, 2013 2:13 am ] |
Post subject: | Re: Reloading brass from a fluted chamber? |
I used to reload 7.62mm NATO and .223 Rem. that had been fired in rifles with fluted chambers. Their initial firing had been in a fluted chamber, but when refired I used them in conventional chambers. I have refired such cases several times before I scrapped them and that wasn't from a failure. They were scrapped because I wanted to beat a potential failure. No amount of refiring in a conventional chamber will iron them out. I never had any problems with the ones I refired several times. |
Author: | NebrHogger [ Fri Jul 05, 2013 9:27 am ] |
Post subject: | Re: Reloading brass from a fluted chamber? |
Thanks for that! I make my 8x50R from 7.62x54R instead of the more expensive 8x56R but I still hope to get a few firings from each case. SW |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |