| Yesterday's Weapons Forums http://www.yesterdaysweapons.com/phpBB3/ |
|
| 7.62 Enfeild http://www.yesterdaysweapons.com/phpBB3/viewtopic.php?f=53&t=1997 |
Page 1 of 1 |
| Author: | ehailstone [ Mon Nov 12, 2007 5:05 am ] |
| Post subject: | 7.62 Enfeild |
This is a new Enfeild.... 
Stamp'd; RIFLE 7-62mm2A1 R.F.I 1968 Im thinking India...... No magizine, nice trigger job, crossed flags stamped, painted black...nice bore too.....Black plastic stocks...with a sight marked I.C.R.1559 R.F.I. I traded a fellow a Gallon of VES (Variable Exhaust System)2 cycle snowmachine oil for it 
|
|
| Author: | Et2ss [ Mon Nov 12, 2007 7:41 am ] |
| Post subject: | |
Ishapore Arsenal, nice shooters. Not sure how it will be for accuracy out of a military stock though. The stock applies upward pressure on the end of the barrel, important for consistent accuracy. Good news is any No1 MkIII stock will fit. Sets can be had pretty inexpensively |
|
| Author: | oldernavy [ Mon Nov 12, 2007 7:41 am ] |
| Post subject: | |
Chip The pic is a wee bit dark by about 3 fstops |
|
| Author: | ehailstone [ Mon Nov 12, 2007 9:37 am ] |
| Post subject: | |
Sorry guys, but I havent found my camera after my last trip...and it may be a bit before I get another.......sooooooooooooooo, like all things in life, that cheap lil' crappy decoy camera I bought for the kids carrys the load....sticky, cracked and alll 
Ishapore...there is a bolt thats holding the forestock to a band on the barrel. Even if were only a club, the price was good. Does the stock set include front sight protector ears? Migfht mention that the rear sight is a bit unusual to me...1 to 800meters I think, with a fine roller and a diengament/quick set knob on th e opposite of the fine adjuster.... It is slick, fast and nice to pull up on the shoulder. 
|
|
| Author: | Et2ss [ Mon Nov 12, 2007 12:19 pm ] |
| Post subject: | |
Springfield Sporters should have stock set for around $30 including the metal There is a spring loaded 'pillar' that is held up by the metal nosepiece. It puts the upward pressure on the barrel. (4-5 lbs at the muzzle) |
|
| Author: | tenboremag [ Mon Nov 12, 2007 7:56 pm ] |
| Post subject: | |
The stock set would not normally include the nose cap with the sight protector ears. It would however come with the metal parts on the handguards. |
|
| Author: | A square 10 [ Mon Nov 12, 2007 8:14 pm ] |
| Post subject: | |
so they make him buy the metal bits seperate ? i thiught their stock sets were complete ....now im disapointed , |
|
| Author: | ehailstone [ Mon Nov 12, 2007 8:22 pm ] |
| Post subject: | |
Great info, guys! I will restock it at that price, and I have a dozen "sleeves" of South African 7.62, Im thinking even an open one
Thanks for the Heads up, Txpete, gotta stay in one pice.
|
|
| Author: | Et2ss [ Tue Nov 13, 2007 12:00 am ] |
| Post subject: | |
Last stock set I got from ssporters was complete but without the front (muzzle) bedding pillar & spring, make sure you ask fro that when you call www.ssporters.com |
|
| Author: | Gatsby [ Tue Nov 13, 2007 12:14 am ] |
| Post subject: | |
Ha! I just got one of these too! Welcome to the Club! |
|
| Author: | A square 10 [ Tue Nov 13, 2007 12:21 pm ] |
| Post subject: | |
nice rifles gents , look like a great buy |
|
| Author: | oldernavy [ Tue Nov 13, 2007 2:14 pm ] |
| Post subject: | |
A SQUARE, I did not know you could read photograph in braille. OR maybe its just me, why is the room so dark?? . Maybe if I turned the brightness on my screen up----now where is it?
|
|
| Author: | A square 10 [ Tue Nov 13, 2007 3:20 pm ] |
| Post subject: | |
i just turned the lights out and squinted thru my night vision goggles 
|
|
| Author: | Gatsby [ Tue Nov 13, 2007 9:38 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|