I picked up 2 more Vetterlis recently - still rimfire. I swapped out the rimfire bolt in one of them (hereinafter known as the "Paris" Vetterli, or the Paris auction Vetterli) for the centerfire converted one (the "Nebraska" -thanks again NebrHogger!) (I can't remember serial numbers, so they have to have names). If I worked the bolt gently I had no problem, but if I pulled it hard enough to activate the elevator it would jam, hard enough that a couple of times I had to use a brass punch and tap the edge of the elevator until it retracted. I've seen a number of posts to the effect that the chambers and bores may vary from one rifle to another, but are the bolts and elevators also different dimensions?
I ended up taking out the elevator and leaving just the spring activating mechanism in, to single shot fire form some cases in the Paris rifle. And I guess I'll only be able to fire single shot until I get the Paris bolt converted?
_________________ Them that know, know that they know. Them that don't know don't know they don't know.
|